The magnetic effect long overlooked in fibre optics
- Wits University
Wits engineers have found that a standard shortcut, used since the 1970s, hid a magneto-optic effect in ordinary glass fibre.
The discovery points towards new sensors and new ways of controlling light.
For more than fifty years, engineers have described light in optical fibre using a convenient shortcut, one that works so well it is rarely questioned. Engineers at the University of the Witwatersrand (Wits University) in Johannesburg, South Africa, have now shown that this shortcut hides a small but real effect. A magnet placed beside a multimode fibre, rather than along it, can change the light travelling inside.
Optical fibres are best known for carrying the light signals that connect us to the internet. These hair-thin strands of glass can also act as sensors, and for decades engineers have used them to measure magnetic fields, including those produced by the electrical currents in power lines and substations.
Such sensors rely on the so-called Faraday effect, first observed by Michael Faraday in a block of glass in 1845. When a magnetic field points along a fibre, it slightly twists the polarisation of the light travelling through it. Polarisation is the direction in which the light wave oscillates, much as a rope can be shaken up and down or side to side. Measuring the twist reveals the strength of the magnetic field, and therefore the strength of the current that produced it.
A magnetic field pointing across the fibre, by contrast, was not expected to produce a Faraday effect. The standard simplified description of light in a fibre leaves out a tiny component of the light, and that component turns out to be the one a sideways field acts on. That may help explain why the effect went unnoticed in such a well-studied technology.

MSc student Mohammed Raiyan Sharif and Professor Mitchell Cox at Wits University have now demonstrated this “transverse” (sideways) Faraday effect in multimode fibre. Their research, conducted at the Wits Optical Communication (OC) Lab in the School of Electrical and Information Engineering, is published in the journal Optics Letters.
A multimode fibre has a glass core wide enough to carry light along many different paths at once. The edge of the core acts like a mirror, so light travelling down the fibre bounces from side to side, with different rays taking different routes. At the far end, these overlapping waves produce a random-seeming pattern of bright and dark spots known as speckle, rather like the view through a kaleidoscope. The researchers watched this pattern with a camera while rearranging strong magnets beside (but not touching) the stationary fibre. The pattern changed.
“What is surprising is finding an overlooked, useful interaction in such a familiar technology,” says Cox. “It’s quite exciting that there is always something new to learn or discover, and often these things are right under our noses, hidden in the assumptions we have made for decades.”
The effect could give engineers a new way to read a magnetic field. Existing Faraday sensors must be wrapped around the conductor carrying the current, which can be awkward to install or position. A transverse sensor could, in principle, simply sit beside the source of the field, for example as a fibre laid along an electrical cable in a trench. The fields near most cables are much weaker than those used in the experiment, however, and how sensitive a practical sensor could be remains to be established.

Explaining the observation took the researchers back to first principles.
“It wasn’t hard to 3D print a rig to test our intuition. Working out the theory for what we were seeing was the challenging part,” says Sharif. “The key was to return to the underlying equations and question assumptions that are usually taken for granted in fibre optics.”
Light is a wave of oscillating electric and magnetic fields. In a fibre, the electric field oscillates almost entirely across the fibre, but a tiny part oscillates along it, in the direction the light travels. The standard description of light in fibres, known as the weak-guidance approximation, ignores this so-called longitudinal component. Ignoring it is an excellent shortcut when the core and the surrounding glass have very similar refractive indices (the refractive index measures how strongly a material slows light). Sharif and Cox studied step-index fibres, in which the refractive index changes in a single sharp step at the edge of the core, rather than gradually as in so-called graded-index fibres. Where that step is large, as in the fibres they tested, the longitudinal component becomes significant near the edge of the core. By keeping it in their equations, the researchers showed that a sideways magnetic field transfers part of the light’s across-the-fibre oscillation into this along-the-fibre component, changing how the light reflects off the edge of the core.
The researchers took care to separate the new effect from a better-known background. A sideways magnetic field also produces the so-called Cotton-Mouton effect, which grows with the square of the field strength (doubling the field quadruples the effect), whereas the transverse Faraday effect grows in direct proportion to the field. By measuring how much the speckle pattern changed, they isolated the proportional signal and confirmed four predictions of their theory. The effect vanishes without a strong step in refractive index, grows for light launched into the fibre at steeper angles, appears for only one polarisation relative to the magnetic field, and varies with the wavelength (colour) of the light in the same way as the conventional Faraday effect. Under a field of 0.24 tesla (roughly the field close to a strong neodymium magnet), light polarised across the field changed the pattern clearly, leaving it only about 84% similar to the original.
Put simply, a magnetic field can change how light reflects off the mirror-like edge of the fibre’s core, and with it the speckle pattern at the output. In the kaleidoscope picture, it is like adjusting the shape of the mirrors while looking through it. In future, this might be done electrically, using a current-carrying coil in place of permanent magnets. That prospect matters for another line of work at the Wits OC Lab, which studies optical computing and optical artificial intelligence.
“Besides sensing, I think that being able to control different modes (patterns of light) inside the fibre electrically could unlock a new way to do optical computing,” says Cox. “We can model the way light gets distorted when it propagates through fibres, frosted glass windows, or even the atmosphere. If we change our perspective on those models, we can actually use light to do mathematical computations for us, for free.” Computing with light in this way is a significant area of research at the Wits OC Lab, where it is being applied to extend the range of wireless optical links (which carry data on laser beams through open air), with the aim of creating affordable “fibre” without the fibre.
The research was supported by the South 第一吃瓜网 Council for Scientific and Industrial Research (CSIR) and the National Research Foundation (NRF).